Pentair FLECK 3150 NXT Installer Manual page 103

a) Set hardness with
ð Can be adjusted from:
ð 1 – 1999 mg/l;
ð 1- 199 °F;
ð 1 - 112.0 °dH;
ð 1 - 140.2 °eH.
ð Any value programmed above the maximum value
for each unit will be discarded and considered as
the maximum above mentioned value for the
relevant unit.
b) Press
next parameter.
6.2.5.18 Reserve
Set the reserve type.
Info
Available only for softening metered systems.
Options:
• weekly reserve;
• variable reserve;
• fixed%;
• fixed volume.
a) Select reserve type with
b) Press
next parameter.
Fixed%
Set the percentage of the total unit capacity used to calculate the unit safety reserve
capacity.
Info
The availability depends on reserve type programmed in the previous step.
Ref. MKT-IM-010 / C - 18.10.2019
Installer manual Fleck 3150 NXT/NXT2 - Programming
and ;
to validate the selection and advance to the
and
to validate the selection and advance to the
;
103 / 182