Pentair FLECK 3150 NXT Installer Manual page 107

Info
Lock Window prevents the unit from regenerating during a specified time frame. Two
lock windows are available (Lock Window #1 and Lock Window #2).
Mandatory
Before deactivating lock window #1, you must deactivate lock window #2 first,
otherwise lock window #2 will remain active but not visible anymore in the
programming.
Lock window #1
Set Lock Window #1 settings.
a) Enable lock window with
ð Default setting: off;
b) Press
next parameter.
c) Set lock start time with
d) Press
next parameter.
e) Set lock end time with
f) Press
next parameter.
Lock window #2
Set Lock Window #2 settings.
Info
Lock Window #2 settings are accessible only if lock windows #1 is on.
Ref. MKT-IM-010 / C - 18.10.2019
Installer manual Fleck 3150 NXT/NXT2 - Programming
and
to validate the selection and advance to the
and
to validate the selection and advance to the
and
to validate the selection and advance to the
;
;
;
Lock window #1
activated.
Lock window #1starts at
12:00.
Lock window #1ends at
13:00.
107 / 182