Pentair FLECK 3150 NXT Installer Manual page 121

6.2.6.26 Saturday average daily usage
Info
Shows average water consumption on Saturday.
6.2.6.27 Saturday- daily usage
Info
Shows water consumption for the last 20 Saturday.
6.2.7 Resetting the controller
Mandatory
Once you have completed this operation, it is necessary to check all programming
steps.
Info
There are two options to reset: reset to factory defaults or reset to Non-Factory
Defaults.
CAUTION
Reset to factory defaults: All the parameters are set to factory default values.
Reset to non-factory defaults: All the parameters are set to previously saved default
values.
Options:
• back: acces to main screen without resetting;
• reset to factory defaults;
• reset to non-factory defaults.
Ref. MKT-IM-010 / C - 18.10.2019
Installer manual Fleck 3150 NXT/NXT2 - Programming
121 / 182