6.2.5.20 Remote signal duration
Set remote signal duration.
Info
The availability depends on remote regeneration option programmed in the previous
step.
Info
The contact will close after a preset signal duration. When the contact closes, remote
regeneration signal is acquired and a regeneration will start (immediate or delayed) as
programmed in Remote regeneration [}Page 104] .
a) Set the signal duration with
ð Can be adjusted from 1 to 5940 seconds;
b) Press
next parameter.
6.2.5.21 Day of the week
Select the day of the week of regeneration.
Info
Available only for day of the week regeneration type.
Options:
• Sunday;
• Monday;
• Tuesday;
• Wednesday;
• Thursday;
• Friday;
• Saturday.
a) Select the days for regeneration with
ð Default setting: Sunday;
ð Multi-selection is possible;
ð Not selected days are marked by
days are marked by
b) Press
next parameter.
Ref. MKT-IM-010 / C - 18.10.2019
Installer manual Fleck 3150 NXT/NXT2 - Programming
to validate the selection and advance to the
;
to validate the selection and advance to the
and
;
and
;
and selected
105 / 182