Nortel Succession 1000 Installation And Configuration Manual page 90
Signaling server
Hide thumbs
Also See for Succession 1000:
- Description, installation and operation manual (646 pages) ,
- Features and services fundamentals (616 pages) ,
- Fundamentals (492 pages)
Table of Contents
Advertisement
Page 90 of 116
Command line interface (CLI) commands
Table 9
General purpose commands (Part 3 of 3)
IPL> command
pbxLinkShow
itgAlarmTest
electShow
elmShow
cardRoleShow
ipstatShow
rudpShow
vgwShowAll
servicesStatusShow
loadBalance
soHelpMenu
553-3001-212
Standard 1.00
Description
Displays information about the link to the CPU,
including the configuration and link status.
Generates ITGxxxx test alarms.
Displays a list of cards in the node and information
about each.
Displays a list of supported languages.
Shows the actual role of the card.
Displays the IP protocol statistics.
Displays the status of the RUDP links on the card.
This includes the Succession 1000 or
Succession 1000M CPU and to all Internet
Telephones registered with the card.
Displays voice gateway channels.
Displays the status of services (iset/vtrk/gk).
Attempts to balance the registration load of
telephones between this Succession Signaling
Server and the rest of the node components.
Shows all the Succession Signaling Server
switch-over CLIs that are available to the user.
October 2003
Element
Manager
!
!
!
!
!
!
!
Advertisement
Table of Contents
