Nortel Succession 1000 Installation And Configuration Manual page 73

Figure 37
Gatekeeper type
Succession Enterprise Software Signaling Server Install Tool (sse-x.xx.xx)
=====================================================================
Please select the Gatekeeper service that this Signaling Server
will provide.
Please enter:
<CR> -> <a> - Failsafe Gatekeeper.
<b> - Primary Gatekeeper.
<c> - Alternate Gatekeeper.
<d> - No co-resident Gatekeeper.
Enter Choice>
13 Enter the Primary Gatekeeper IP address, the Alternate Gatekeeper
IP address, or both, depending on the option selected in step 12 on
page 72. See Figure 38 on
• If option 'a' was selected in step 12, you must enter the addresses of
both the Primary Gatekeeper and the Alternate Gatekeeper.
• If option 'b' was selected in step 12, you can enter the address of the
Alternate Gatekeeper.
• If option 'c' was selected in step 12, you must enter the address of
the Primary Gatekeeper.
• If option 'd' was selected in step 12:
— If this Succession Signaling Server will not run the Gatekeeper
application, the Primary Gatekeeper address is optional. If it is
entered, the address of the Alternate Gatekeeper is prompted,
but it is also optional.
— If network information is unknown, do not enter an address.
The Gatekeeper configuration can be updated later using Element
Manager.
Software installation
page 74.
Signaling Server Installation and Configuration
Page 73 of 116