Nortel Succession 1000 Installation And Configuration Manual page 109

Figure 45
Removing/replacing the cover on the Succession Signaling Server
2 Remove the 128 MB DIMM boards from the Succession Signaling Server.
Refer to Figure 46 on
Note: Remove all of the original 128MB DIMM boards.
Appendix A: Upgrading memory
page 110.
CAUTION
Hold the tips of your fingers lightly on the
back edge (D) of the DIMM board to prevent
the board from suddenly ejecting from the
socket (C). The DIMM board or other
components on the Succession Signaling
Server board could be damaged if the DIMM
board is allowed to suddenly eject from the
socket.
Signaling Server
Page 109 of 116
553-AAA1108
Installation and Configuration