Succession Signaling Server Tools Menu - Nortel Succession 1000 Installation And Configuration Manual

Succession Signaling Server tools menu

Figure 44
Tools menu
Succession Enterprise Software Signaling Server Install Tool (sse-3.xx.xx)
=======================================================================
This is the Tools Menu. Please select one of the options below.
Please enter:
<CR> -> <a> - To set system date and time.
<b> - To partition and initialize the hard disk.
<c> - To reset the Administrator login and password.
<d> - To test the hard disk.
<e> - To change the web server security flag.
<m> - To return to the Main Menu.
Enter Choice>
From the Tools Menu in the Succession Signaling Server Install Tool, you
can perform the following tasks:
• set the system time and date
• repartition and initialize the hard desk
• reset the Administrator login and password
• test the hard disk
• change the web server security flag
Use Procedure 9 to access the Tools Menu options in the Succession
Signaling Server Install Tool.
Procedure 9
Using the Tools Menu in the Succession Signaling Server Install Tool
1 Enter 't' at the Install Tool Main Menu (Figure 28 on
the Tools Menu. The Tools Menu appears, as shown in Figure 44 on
page 101.
T O O L S M E N U
Signaling Server
Maintenance Page 101 of 116
page 66) to access
Installation and Configuration