Patch Ipl> Commands - Nortel Succession 1000 Installation And Configuration Manual
Signaling server
Hide thumbs
Also See for Succession 1000:
- Description, installation and operation manual (646 pages) ,
- Features and services fundamentals (616 pages) ,
- Fundamentals (492 pages)
Table of Contents
Advertisement
Page 98 of 116
Command line interface (CLI) commands
Table 16
Forced disable commands (Part 2 of 2)
IPL> command
forcedisGK
Patch IPL> commands
Table 17
Patch commands
IPL> command
pnew
pload
pins
pout
poos
plis
pstat
553-3001-212
Standard 1.00
Description
Forces the local Gatekeeper out of service.
Table 17 lists the patch commands. These commands must be entered at the
PDT shell.
Description
Creates memory patches for the card.
Loads a patch file from the filesystem on Flash
memory into DRAM memory.
Puts a patch into service that has been loaded into
memory using pload.
Removes a patch from the DRAM memory.
Deactivates a patch by restoring the patched
procedure to its original state.
Gives detailed patch status for a loaded patch.
Gives summary status for one or all loaded
patches.
October 2003
Element
Manager
!
Element
Manager
!
!
!
!
!
!
!
Advertisement
Table of Contents
