Nortel Succession 1000 Installation And Configuration Manual page 61

Figure 22
First boot of a new system
Succession Enterprise Software Signaling Server Install Tool (sse-x.xx.xx)
=====================================================================
The filesystems verification failed! (This is normal for a new
system.)
The hard disk must be (re)partitioned and (re)initialized. This will
erase all data on the hard disk. The system will then reboot and
the Install Tool will restart.
Please enter:
<CR> -> <a> - Partition and initialize the hard disk, then reboot.
Enter Choice> a
a. Enter 'a' to start the new installation.
The system displays the messages:
Partitioning hard disk ...
Hard disk partitioning succeeded.
Creating filesystems ...
Filesystems creation succeeded.
Rebooting system ...
b. The Install Tool banner screen (Figure 21 on
reappears. Press <CR> to verify the filesystems.
The disk check reports:
Filesystems verification succeeded.
c. Confirm or enter the date and time (Figure 23 on
Signaling Server
Software installation
Installation and Configuration
Page 61 of 116
page 60)
page 62).