File Transfer Ipl> Commands; Reset Ipl> Commands - Nortel Succession 1000 Installation And Configuration Manual

File transfer IPL> commands
Table 10
File transfer commands
IPL> command
bootPFileGet
bootPFilePut
configFileGet
currOMFilePut
omFilePut
hostFileGet
hostFilePut
Reset IPL> commands
Table 11
Reset commands (Part 1 of 2)
IPL> command
isetReset "tn" l s c u
isetReset "tn" c u
Command line interface (CLI) commands
Table 10 lists the file transfer IPL> commands. These commands must be
entered at the vxWorks
Description
Sends an updated bootptab file from the host to the
card.
Send the bootptab file to the specified host.
Sends an updated config.ini file from the host to the
card.
Sends the current OM file to the specified host.
Sends the current OM file to the specified host.
Transfers any file from OTM to ITG.
Transfers any file from ITG to the specified host.
Table 11 lists the reset IPL> commands. These commands must be entered at
TM
the vxWorks shell.
Description
Resets the Internet Telephone on
Succession 1000M Large Systems.
Resets the Internet Telephone on Succession 1000
and Succession 1000M Small Systems.
TM
shell.
Signaling Server
Page 91 of 116
Element
Manager
Element
Manager
Installation and Configuration