Nortel Succession 1000 Installation And Configuration Manual page 71

Figure 35
Leader Succession Signaling Server
Succession Enterprise Software Signaling Server Install Tool (sse-x.xx.xx)
=====================================================================
Please define the data networking and IP Telephony parameters for
this Leader Signaling Server now.
Node ID
Hostname
ELAN IP
ELAN subnet mask: 255.255.255.0
ELAN gateway IP : 192.168.10.1
TLAN IP
TLAN subnet mask: 255.255.255.0
TLAN gateway IP : 192.168.20.1
Node IP
10 Configure the node IP using the TLAN IP and a node ID. The
IP information is for a temporary IP Telephony node. This ensures that
the existing node is not impacted. This also pre-configures the
IP Telephony node files. In "Importing IP Telephony node files" on
page 84, the node files are imported to Element Manager for further
configuration.
Note: IP addresses shown in Figure 35, Figure 36 on
Figure 41 on page 76
: 276
: SS_Node276_Ldr
: 192.168.10.20
: 192.168.20.20
: 192.168.10.20
11 Enter the ELAN IP address of the Succession Call Server at the prompt.
See Figure 36.
• If installing the Succession Signaling Server in an office that is not a
Branch Office, enter the ELAN IP address of the Succession Call
Server.
• If installing the Succession Signaling Server in a Branch Office, enter
the ELAN IP address of the H.323 WAN Gateway.
Software installation
are examples.
Signaling Server
Page 71 of 116
page 72, and
Installation and Configuration