Nortel Succession 1000 Installation And Configuration Manual page 21

Figure 3
Connectors on the back of the Succession Signaling Server
not used
Universal ac
power cord
connector
Refer to Figure 2 on
• The front DB-9 serial port can support a login session for Command Line
Interface (CLI) management.
• The CD-ROM drive is used to load the Succession Signaling Server
software files for the Succession Signaling Server, Voice Gateway
Media Cards (VGMC), and Internet Telephones. The Succession
Signaling Server software includes the Succession Signaling Server
operating system, and applications, and all Element Manager web server
files.
• The floppy drive is used if the CD-ROM is not bootable. To create a boot
floppy, use the files in the mkboot directory on the Succession
Signaling Server Software CD-ROM. You can use the same boot floppy
for any or all Software CD-ROMs.
Rear connectors and ports
Figure 3 shows the cable connectors on the back of the Succession Signaling
Server.
not used
not used
Refer to Figure 3.
• The AC power cord connector is at the back of the Succession Signaling
Server on the left side.
page 20.
P2 (TLAN)
P1 (ELAN)
Signaling Server
Overview Page 21 of 116
553-AAA0104
Maintenance/
Console port
Installation and Configuration