Nortel Succession 1000 Installation And Configuration Manual page 74
Signaling server
Hide thumbs
Also See for Succession 1000:
- Description, installation and operation manual (646 pages) ,
- Features and services fundamentals (616 pages) ,
- Fundamentals (492 pages)
Table of Contents
Advertisement
Page 74 of 116
Software installation
Figure 38
Gatekeeper IP addresses
Succession Enterprise Software Signaling Server Install Tool (sse-x.xx.xx)
=====================================================================
If you know them, please enter the addresses of the Gatekeepers that
this IP Telephony node will register to.
Primary GK IP
Alternate GK IP :
Figure 39
Succession Signaling Server application configuration
Succession Enterprise Software Signaling Server Install Tool (sse-x.xx.xx)
==================================================================+==
Please select the application configuration for this
Gatekeeper.
Please enter:
<CR> -> <a> - Co-resident (GK + TPS + VTRK).
<b> - Standalone (GK only).
Enter Choice> a
553-3001-212
Standard 1.00
:
14 Enter 'a' to configure the Succession Signaling Server to run the
Gatekeeper, TPS, and Virtual Trunks. See Figure 39. Go to step 16 on
page
75.
15 If this is a Follower Succession Signaling Server, enter the hostname for
the Follower from the menu in Figure 40 on
October 2003
page
75.
Advertisement
Table of Contents
