Nortel Succession 1000 Installation And Configuration Manual page 17

Signaling server
Table of Contents

Advertisement

H.323 Gatekeeper
Element Manager web server
Internet Telephone Terminal Proxy Server
The Terminal Proxy Server (TPS) provides the signaling interface for the
Internet Telephones. The TPS supports a maximum of 10,000 Internet
Telephones on each Succession Signaling Server. In conjunction with the
Succession Call Server, the TPS delivers a full suite of telephone features.
The Unified Network IP Stimulus protocol (UNIStim) is the single point of
contact between the various server components and the Internet Telephone.
UNIStim is the stimulus-based protocol used for communication between an
Internet Telephone and a Terminal Proxy Server on the Voice Gateway
Media Card.
IP Peer Networking supports the i2002 and i2004 Internet Telephones and the
i2050 Software Phone (soft client) for IP Telephony. Each Internet
Telephone can be configured through the Dynamic Host Configuration
Protocol (DHCP) to register with a Succession Call Server for feature control.
The TPS on the Succession Signaling Server also manages the firmware for
the Internet Telephones which are registered to it. Accordingly, the TPS also
manages the updating of the firmware for those Internet Telephones. For
more information on upgrading the firmware IP Line: Description,
Installation, and Operation (553-3001-365) and Branch Office
(553-3001-214)
H.323 Signaling software (Virtual Trunk)
H.323 is a protocol standard that specifies the components, protocols, and
procedures that provide multimedia communication services over packet
networks.
The H.323 Signaling software (Virtual Trunk) provides the industry-standard
H.323 signaling interface to H.323 Gateways. This software uses a
Gatekeeper to resolve addressing for systems at different sites.
Signaling Server
Installation and Configuration
Overview
Page 17 of 116

Advertisement

Table of Contents
loading

This manual is also suitable for:

Succession 1000m

Table of Contents