Nortel Succession 1000 Installation And Configuration Manual page 35
Signaling server
Hide thumbs
Also See for Succession 1000:
- Description, installation and operation manual (646 pages) ,
- Features and services fundamentals (616 pages) ,
- Fundamentals (492 pages)
Table of Contents
Advertisement
Materials required
To install the Succession Signaling Server, obtain the following items:
1
The Succession Signaling Server.
Note: Save the packaging container and packing materials in case you
must reship the product.
2
The power cable for the Succession Signaling Server. Check that the
power cord is the exact type required in the host region. Do not modify
or use the supplied AC power cord if it is not the correct type.
3
The serial cable for the Succession Signaling Server.
4
The Ethernet cables for networking.
5
The contents of the accessories pouch to install the Succession Signaling
Server. The accessories pouch should contain the following items:
a
Two chassis support brackets (A)
b
Two rack-mounting brackets (B)
c
Six rack-mount bracket screws (10-25 x 1/4" panhead Phillips)
d
Two bezel door long rack-mount screws
Refer to Figure 5 on
supplier immediately.
Hardware installation
page
36. If any parts are missing, contact your
Signaling Server
Page 35 of 116
Installation and Configuration
Advertisement
Table of Contents
