Page 110 of 116
553-3001-212
Standard 1.00
Appendix A: Upgrading memory
a.
Grasp the ejector lever (A) on one end of the DIMM board and push
down on the lever until the edge of the board connector (B) just lifts
out of the socket (C).
b.
Grasp the ejector lever (E) on the other end of the DIMM board and
carefully push down on the lever until the DIMM board is loose from
the socket.
Figure 46
Removing a 128MB DIMM board
553-AAA1110
October 2003