Figure 27
Tested within 24 hours
Succession Enterprise Software Signaling Server Install Tool (sse-x.xx.xx)
=====================================================================
The Install Tool has detected that the hard disk has been tested
recently.
It is recommended to skip the hard disk test.
If you select to test the hard disk anyway, it will take
approximately 14 minutes.
Please enter:
<CR> -> <a> - Skip the hard disk test.
<b> - Test the hard disk.
Enter Choice> a
The following messages print out:
Testing hard disk ...
Testing partition /u (4194241 blocks) ...
xxx% complete
Testing partition /p (4194241 blocks) ...
xxx% complete
Hard disk testing succeeded.
Where xxx = 0 to 100.
Note: If the physical check did not pass, contact your technical support
group.
Software installation
Signaling Server
Installation and Configuration
Page 65 of 116