Page 112 of 116
Verifying a successful memory upgrade
553-3001-212
Standard 1.00
Appendix A: Upgrading memory
Figure 47
Installing a 512MB DIMM board
4
Replace the cover on the Succession Signaling Server. Refer to Figure 45
on
page
109.
a.
Position the cover on the chassis with the notched edge (B) facing
the front and the slotted sides of the cover inside the chassis frame.
b.
Grasp the back edge of the cover. Simultaneously, push from the
back and top until the cover slides all the way under the edge of the
Succession Signaling Server front panel.
c.
Use a Phillips screwdriver and the screw (A) removed in step 1 on
page 108
d.
Attach the memory label (reading "512MB") to the back edge of the
cover.
Use this procedure to ensure that the memory upgrade was successful.
October 2003
to securely attach the cover to the chassis.
End of Procedure
553-AAA1109