Nortel Succession 1000 Installation And Configuration Manual page 36
Signaling server
Hide thumbs
Also See for Succession 1000:
- Description, installation and operation manual (646 pages) ,
- Features and services fundamentals (616 pages) ,
- Fundamentals (492 pages)
Table of Contents
Advertisement
Page 36 of 116
Hardware installation
Figure 5
Succession Signaling Server brackets
Preparing for rack-mounting
553-3001-212
Standard 1.00
CAUTION
The load rating for this mounting kit is 50 pounds
(23 kilograms). If you exceed this limit, damage or injury
can occur.
Procedure 1
Preparing the Succession Signaling Server for rack-mounting
Note: The Front Mount Bracket assembly is not intended for use as a
slide rail system. The Succession Signaling Server must be firmly
attached to the rack.
1
Make sure the Succession Signaling Server is not plugged-in to an
electrical outlet.
2
Align the end of the rail with the flange (B) toward the back of the
Succession Signaling Server. See Figure 6 on
October 2003
page
37.
Advertisement
Table of Contents
