Nortel Succession 1000 Installation And Configuration Manual page 76

Page 76 of 116 Software installation
Figure 41
IP Telephony parameter configuration
Succession Enterprise Software Signaling Server Install Tool (sse-x.xx.xx)
=====================================================================
You have entered the following parameters for this Leader
Signaling Server:
Node ID
Hostname
ELAN IP
ELAN subnet mask: 255.255.255.0
ELAN gateway IP : 192.168.10.1
TLAN IP
TLAN subnet mask: 255.255.255.0
TLAN gateway IP : 192.168.20.1
Node IP
Call Server IP
GK configuration: No Gatekeeper
Primary GK IP
Alternate GK IP : 0.0.0.0
Please enter:
<CR> -> <y> - Yes, these parameters are correct.
<n> - No, these parameters are not correct.
Enter Choice>
553-3001-212 Standard 1.00
: 276
: SS_Node276_Ldr
: 192.168.20.100
: 192.168.20.20
: 192.168.20.100
: 192.168.10.10
: 0.0.0.0
The system echoes the ELAN MAC address.
For future reference, the ELAN MAC address is:
"00:02:b3:c5:5l:c6".
This address is on the face of the Succession Signaling Server, on the
right-hand side when the bezel door is open. See Figure 15 on
Note: The ELAN MAC address must be configured in the Element
Manager node configuration page.
17 To complete the installation, the Installation Status Summary screen is
displayed as shown in Figure 42 on
October 2003
page 77.
page 48.