Nortel Succession 1000 Installation And Configuration Manual page 107

Appendix A: Upgrading memory
CAUTION WITH ESDS DEVICES
ELECTROSTATIC DISCHARGE (ESD) AND ESD
PROTECTION: Since the Succession Signaling Server
can be extremely sensitive to ESD, perform the
procedures in this section only at an ESD workstation. If
an ESD station is not available, you can reduce the risk of
ESD damage by:
• Wearing the antistatic wrist strap provided and attach
it to a metal part of the Succession Signaling Server.
• Touch the metal on the Succession Signaling Server
chassis before touching the Succession Signaling
Server components.
• Keep part of your body in contact with the metal
Succession Signaling Server chassis to dissipate the
static charge while handling the components.
• Avoid moving around unnecessarily.
• Hold the Succession Signaling Server components
(especially boards) only by the edges.
• Place the Succession Signaling Server components
on a grounded, static-free surface. Use a conductive
foam pad if available, but NOT the component
wrapper.
• Do not slide the components over any surface.
CAUTION — Service Interruption
COOLING AND AIRFLOW: For proper cooling and
airflow, always install the chassis access cover before
turned on the system. Operating the system without the
cover in place can cause overheating and damage to
system parts.
Signaling Server
Page 107 of 116
Installation and Configuration