At the front left corner of the machine, open the cover, press the
operation power switch [A], and then close the cover.
A message appears and tells you to wait at least 2 min. until the machine
powers down completely.
This gives the hard disk drive enough time to stop rotating and to shut
Wait for the operation panel to switch off before you start work on the
machine.
The main power switch [B] is set to ON when the machine is delivered. Do
not touch this switch. Leave it set to ON. Switch the machine off with
switch [A] and then unplug the machine.
Slide 100
No additional notes
Turning the Power Off
down safely before the machine loses power.
100
BR-C1 Training