Ricoh BR-C1a Basic Service Training page 277

Slide 277
No additional notes
Replacement and Adjustment
Cleaning the Development Unit - 5
277
 Finally, set the jig handle
again and turn it through
more than 10 full rotations in
the direction of the arrow.
 If you make a mistake and
rotate it in the opposite
direction, turn the jig 20
times in the direction of the
arrow.
 If you do not rotate the
roller correctly, the
developer will not be
balanced correctly.
 Rotate the jig handle one
more time. When you see the
fresh developer on the
development roller, you are
finished.
BR-C1 Training