Improved productivity in stapling mode, because the
capacity of the pre-stack tray is increased.
Air-assisted paper delivery has been added for the shift
tray, to improve stacking for large-size coated paper.
The staple unit has a new mechanism to move the bottom
fence up and down slightly, to allow the stapling position
to be adjusted (this is a TCRU adjustment).
The folding unit has an improved folding plate, and it
pushes the paper further through the folding roller nip.
This new finisher is able to support up to 20 sheets
(80g/m2) for saddle stitching.
The punch unit allows punching at 135ppm. Also, the
punch has a registration mechanism (similar to previous
finishers).
Slide 87
For details on the new mechanisms, see the section of the course about the
finisher.
Finisher
87
BR-C1 Training