Lubricant End Detection
The lubricant end sensors [A] are at the top of the unit behind the
lubricant blade.
Lubricant near-end: When the sensor is activated, the drum can
turn 10 km more, then a near-end alert appears.
Lubricant end: After near-end, the machine can run for another 40
km. Then the lubricant end alert is issued and the machine stops.
The lubricant bar must be replaced.
The lubricant bar, blade, and brush roller must all be replaced at
the same time.
Slide 230
The target yield for the lubricant bar is 640k.
230
BR-C1 Training