Comparison between previous models and SR5060
Also, paper switch-back is different from previous models.
In previous models, switchback stops before the trailing edge of the paper
goes back through the 1
rollers (B4 or larger)
If the trailing edge goes through this roller, then no roller is touching the paper.
The next sheet comes in at the same time that the first sheet is being switched
back.
When the leading edge of this 2
roller feeds both sheets out to the staple tray. However, the leading edges are
not aligned.
Slide 497
No additional notes
Pre-stacking
st
pre-stack
rollers (A4 or smaller) or the 2
.
nd
sheet gets to the 1
Previous models
Shunt Area
1st Pre-stack
Rollers
2nd Pre-stack
Rollers
497
nd
pre-stack
st
pre-stack roller, the
Previous models
SR5060
3rd Pre-stack
Rollers
Shunt Area
1st Pre-stack
Rollers
2nd Pre-stack
Rollers
BR-C1 Training