Potential Control Timing - Ricoh BR-C1a Basic Service Training

 At power ON, or after returning from low power mode after
machine has been idle for more than 6 hours, or when the
front doors are closed
 Process control executes if one of these conditions is met
 During printing
 If the page count of SP3529-006 is greater than or equal to
 At end of a job
 If the page count of SP3529-006 is greater than or equal to
Slide 292
No additional notes
Potential Control
Timing - 1
since the last time the machine was turned off:
» Idle time greater than or equal to SP3530-001, or if the page
count of SP3530-007, -008 is greater than or equal to the
SP3530-005, -006 at power ON.
» Temperature change is greater than or equal to SP3530-002.
» Relative humidity change is greater than or equal to SP3530-
003.
» Absolute humidity change is greater than or equal to SP3530-
004.
SP3533-002.
SP3534-002.
292
BR-C1 Training