Ricoh BR-C1a Basic Service Training page 356

Slide 356
No additional notes
ITB Contact
 Normally the ITB is in contact
with the ITB transfer roller and
the drum (there is no motor
mechanism to automatically
change the position of the ITB).
 There are two drum, transfer belt,
and PTR separation levers:
 Before the ITB unit is pulled out
of the machine, pressure lever
[A] must be lowered to separate
the drum [B] and the belt [C].
 When lever [D] is lowered
before pulling out the drawer,
this separates the PTR from the
drum and belt.
356
BR-C1 Training