Ricoh BR-C1a Basic Service Training page 217

 Laser beams can seriously damage the eyes and
cause permanent blindness.
 Make sure that the machine is switched off and
unplugged from the power source before
performing any procedure in this section.
 Turn off the power switch on the left front corner
of the machine. A message will prompt you to
wait before you switch on the main switch.
 After the message goes off, switch off the main
power switch.
 Unplug the machine and wait at least 10 min.
before performing any procedure.
Slide 217
No additional notes
Cautions
Laser Unit
217
BR-C1 Training