Ricoh BR-C1a Basic Service Training page 399

Slide 399
No additional notes
Replacement and Adjustment
Installing the Lubricant Brush Roller
 Before replacing this roller,
apply setting powder to both
ends of the roller [A] (about
30 mm or 1 in. from each
end). This prevents the roller
from catching on the blade.
 [A] shows the minimum
amount applied and [B] the
maximum amount applied.
 Turn gear [B] in the direction
of the arrow 3 to 5 times to
spread the power evenly.
399
BR-C1 Training