Table of Contents
Advertisement
8.
Do SP3024-001 to start the fill operation.
9.
Remove the bottle.
10. Do SP7622-012 to reset the counter.
11. Close the doors.
11. Do SP3012-001 to confirm that process control executed normally.
This completes the procedure.
Slide 272
No additional notes
Replacement and Adjustment
Installing New Developer - 2
Filling requires about 60 sec.
The machine will alert you with a message after filling is
completed. If the operation fails, first make sure that you have
removed the seal. Do SP3025-001 to check the result, and then
do SP3024-001 again.
The machine automatically initializes the development unit TD
sensor.
After successful initialization of the TD sensor, the machine will
automatically execute process control.
If a problem occurs, the machine will issue an SC code. Refer to
the SC code tables, and then follow the procedure to correct the
problem.
After resolving the problem, do SP3030-001 to initialize the ID sensor.
Next, do SP3011-002 to manually execute process control (it will not
execute again automatically).
272
BR-C1 Training
Advertisement
Table of Contents
