Ricoh BR-C1a Basic Service Training page 126

Slide 126
No additional notes
Moving the Folder

To prevent damage to the connection
brackets, never attempt to move or
change the position of the system
with the LCT, the Multi-Folding Unit,
(or any other downstream peripheral)
connected.

Turn the system off and unplug the
main machine from the power source.

Disconnect the unit I/F cord from the
upstream unit (or main machine) and
downstream unit.

Make sure that the front door of the
unit is closed.

Disconnect the unit power plug.

When you move the unit:
 Place your hands on the front left
and right corners of the unit.
 Push the unit in the direction of the
arrow.
 Pushing the unit front-to-rear
prevents twisting the delicate
frame of the unit.
126
BR-C1 Training