Slide 95
After prolonged use, if you see the breaker switch covered with soot, this could
indicate that the switch has malfunctioned or been damaged.
To prevent damage to the breaker switch, installation of a voltage stabilizer
(constant voltage transformer) is recommended for work sites where there is
significant fluctuation in the AC power source.
Breaker Switch Test - 1
The breaker switch is at
Test it at installation.
Inspect, clean, and test at
The Ring Binder and
95
the left rear corner of the
machine.
least once a year.
Perfect Binder also each
have a breaker switch.
Test these at
installation.
Inspect, clean, and test
at least once a year.
BR-C1 Training