Ricoh BR-C1a Basic Service Training page 403

 The cleaning blade, lubricant roller, and lubricant
bar are always replaced together.
 Setting powder (zinc stearate) is applied to the
cleaning blade at the factory.
 When this set of parts is replaced, setting
powder must be applied at the PTR roller nip on
both ends of the roller while the PTR is rotated.
 When the paper transfer roller (PTR) is replaced,
the entire surface of the roller must be dusted
with setting powder while the PTR is rotated.
Slide 403
No additional notes
Replacement and Adjustment
Notes about Lubrication
403
BR-C1 Training