Ricoh BR-C1a Basic Service Training page 489

Side View
Slide 489
No additional notes
Replacement and Adjustment
Working on the Decurler Unit
View from Above
 After you remove the decurl
unit, keep it in the
"Maintenance Position" as
described below.
 Lay the Decurl Unit [A] on
temporary supports [B]. The
entrance guide must not
touch the floor or any object.
Otherwise, the mylars on the
entrance gate may be bent or
folded.
 Keep this position during
maintenance.
 Place an object like a sheet
of cardboard on the supports
so that the frame projection
[C] does not damage the
supports.
489
BR-C1 Training