Slide 338
No additional notes
Roller Release - 1
When the registration timing
sensor [A] detects the leading
edge of the sheet:
Feed from paper trays or
side 2 of duplex printing: The
main relay separation motor
[B] turns on and opens the
nip between the relay drive
and idle roller.
Feed from LCT: The LCT
relay motor [D] opens the nip
of the LCT relay rollers.
In both cases, the paper is
released in front of the
registration timing roller [C],
so it is free to move for image
registration in the main scan
direction.
338
BR-C1 Training