Ricoh BR-C1a Basic Service Training page 96

 [1] is the normal position of the breaker switch test button.
 Use the tip of a small screwdriver or pen to push the breaker test
button. The breaker switch should flip to the "O" position [2]. This
indicates that the breaker switch is operating normally.
 If the breaker switch does not flip to the "O" position, the switch
must be replaced.
 Push the switch up to the "|" position [3] for normal operation.
 The main machine will not turn on if the breaker switch is not
Slide 96
No additional notes
Breaker Switch Test - 2
returned to the "|" position as shown at [1].
96
BR-C1 Training