Service And Repairs; Replacing The Brake Cable - Toro Greensmaster e1021 Service Manual

Service and Repairs

Replacing the Brake Cable

g336874
1. Shoulder screw
2. Flange bushing (2 each)
3. Lever
Removing the Brake Cable
Controls, Wheels and Accessories : Service and Repairs
4. Upper receiver weldment
5. Flange nut
6. Handle assembly
Note: Refer to Figure 78
1. Park the machine on a level surface. Ensure that the key switch is in OFF
position and the traction control is in NEUTRAL and parking brake is released.
2. Disconnect the battery pack; refer to
(page 5–3).
Figure 78
during this procedure.
Connecting the Lithium Battery Pack
Page 6–4
7. Brake cable spring
8. Jam nut
9. Brake cable
Greensmaster
20246SL Rev A
® e1021/e1026