LDAP Address Book - Access Error
Phaser 6500/WorkCentre 6505 Service Manual
Applicable Error Code
•
016-530
Troubleshooting Reference Table
Applicable Parts
IP Board (ESS) (MFP PL8.1.2)
■
Troubleshooting Procedure
Step Actions and Questions
1
Check the LDAP settings
Is LDAP set correctly?
2
Check the firmware version
Is the firmware the latest version?
3
Check the IP Board installation
Reseat the IP Board. (SFP, page 8-120;
MFP, page 8-144)
Does the error still occur when turning
the power Off and On?
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 8 - MFP LVPS, IP Board, and
■
Drive" on page 10-17
Yes
Go to step 4.
Go to step 3.
Replace the IP
Board. (SFP,
page 8-120;
MFP,
page 8-144)
No
Verify that
LDAP settings
are correct in
CWIS.
Update the
firmware
("Firmware
Update" on
page A-16),
then go to step
3.
Complete.
3-47