Table of Contents
Advertisement
User Guide
c. Press the release handle into the Fan Module and secure it in place by turning the
d. Verify that the Fan Module is securely latched into the chassis by pulling on the release
e. Install each Fan Module in the same way the first was installed.
Step 13 : Connect the power and data cables to the enclosure.
3.2.6 Chassis Replacement
Figure 151: Fan Module Engaged
thumbscrew clockwise until it is tight.
Figure 152: Fan Module Secure
handle and ensuring the Fan Module does not move when pulled. Reinstall the Fan
Module if it is not securely installed into the chassis.
3. Management
3.2 Part Replacement
113
Advertisement
Table of Contents
