Western Digital OpenFlex F3100 User Manual page 96

User Guide
c. Locate the sticker on the side of the BMC Module that lists the mac address for that
module and record it somewhere for later use. The mac address of the BMC module will
be used to later to navigate to the BMC GUI in order to access the storage.
Step 3 : Install the new BMC Module into the enclosure.
a. Grasp the release handle with your forefinger on the bottom and thumb on the top of
the release latch and press the release latch with your thumb. The handle will eject from
the front of the BMC module.
b. Gently slide the BMC module into the center chassis slot until the release handle is
engaged with the chassis. When the handle lifts up slightly, it is an indicator that the
release handle is engaged with the chassis.
Figure 107: BMC Module MAC Address Label
Figure 108: BMC Module Release Handle Operation
3. Management
3.2 Part Replacement
90