Table of Contents
Advertisement
Installation Guide
Figure 28: Rack Latch Bracket Installed
b. Use 6 of the included M5 x 12mm screws and the T15 Torx screwdriver to install each bracket,
3 screws per bracket.
W hat to do next: T he rails are now installed. Proceed to
5.3 Chassis Installation
This procedure provides instructions for installing the chassis of an Ultrastar Serv60+8 .
Before you begin: Complete the instructions in
Table 35: Installation Requirements
Tool(s): N/A
Part(s): N/A
Person(s): 2 for team-lifting, plus 1 to guide and spot (total of 3)
Chassis Installation (page
Rails Installation (page
46).
5. Installation
5.3 Chassis Installation
57).
57
Advertisement
Table of Contents
