Table of Contents
Advertisement
User Guide
c. Press the release handle into the Fan Module and secure it in place by turning the
d. Verify that the Fan Module is securely latched into the chassis by pulling on the release
3.2.2 PSU Replacement
Be careful not to remove both power cables if performing a hot-swap of a PSU. The system needs one PSU
running to prevent data disruption.
Figure 96: Fan Module Engaged
thumbscrew clockwise until it is tight.
Figure 97: Fan Module Secure
handle and ensuring the Fan Module does not move when pulled. Reinstall the Fan
Module if it is not securely installed into the chassis.
3. Management
3.2 Part Replacement
84
Advertisement
Table of Contents
