Western Digital OpenFlex F3100 User Manual page 89

User Guide
c. Uninstall each Fan Module in the same way the first was uninstalled.
Step 3 : Install the new Fan Module into the enclosure.
a. Unlock the Fan Module by turning the thumbscrew counterclockwise until the screw
threads are not engaged any longer. The location of the thumbscrew is shown in the
following image.
b. Gently slide the Fan Module into the fan bay until the release handle is engaged with
the chassis. When the handle lifts up slightly, it is an indicator that the release handle is
engaged with the chassis.
Figure 94: Uninstall Fan Module
Figure 95: Prepare Fan Module
3. Management
3.2 Part Replacement
83