Western Digital OpenFlex F3100 User Manual page 129

User Guide
c. Verify that the Chassis is secured to the rails and does not move when pulled. Remove
the screws and try again if the enclosure is not secured to the rack.
d. Install the rack ear covers onto both of the chassis mounts.
Step 10 : Install the BMC module into the enclosure.
a. Grasp the release handle with your forefinger on the bottom and thumb on the top of
the release latch and press the release latch with your thumb. The handle will eject from
the front of the BMC module.
Figure 171: Chassis Screw Installation
Figure 172: Rack Ear Cover Installation
3. Management
3.2 Part Replacement
123