Chassis Installation - Western Digital Ultrastar Data60 Installation Manual

Installation Guide
5.4 Chassis Installation
This procedure provides instructions for installing the chassis of an Ultrastar Data60 .
Before you begin: Complete the instructions in
Table 28: Installation Requirements
Tool(s):
Part(s):
Person(s):
Time:
Caution:
rack. Not having the top cover installed may damage the alignment brackets.
Step 1 : Extend the mid-rails out of the rack so that they are protruding from the front of the rack and the
safety latches engage.
Figure 26: Extend Mid-Rails
Step 2 : Install the chassis into the rails.
N/A
N/A
2 for team-lifting, plus 1 to guide and spot (total of 3)
10 minutes
Always install the top cover onto the enclosure before installing the chassis into a
Rails Installation (page 31)
5. Installation

5.4 Chassis Installation

.
40