Table of Contents
Advertisement
User Guide
Step 5 : The Device will reboot and the connection to the device will be lost until the reboot is
complete.
3.1.6.2 Power Cycling a Chassis Device Using the OCGUI
This task provides instructions for power cycling a chassis device using the OCGUI.
Step 1 : Navigate to the device's dashboard.
Step 2 : Click the Administration icon:
Step 3 : Click the Reboot button:
Step 4 : Click Reboot:
Step 5 : The chassis device will reboot and the connection to the chassis device will be lost until the
reboot is complete. When the chassis device is being rebooted the installed devices will
remain functional.
3.1.7 Firmware Upgrade
3.1.7.1 Upgrading Device Firmware Using the OCGUI
This task provides steps that should be followed to upgrade the firmware of devices using the OCGUI.
Step 1 : Open a web browser and go to:
The Western Digital Enterprise Support Center will appear.
Step 2 : Log in to the Western Digital enterprise support center using a Email and password.
https:/
/portal.wdc.com/Support/s/.
3. Management
3.1 OCGUI
75
Advertisement
Table of Contents
