Chassis Disassembly - Western Digital OpenFlex Data24 EcoDesign Manual

EcoDesign Disclosures
Step 2 : Verify data cannot be accessed by attempting reads to the drive. The data that exists on the
drive will no longer be accessible, because the encryption key has been deleted.
1.4 Chassis Disassembly
This procedure provides instructions for disassembling an OpenFlex Data24 Chassis.
Table 1: Replacement Procedure Info
• T7 Torx screwdriver
• T8 Torx screwdriver
• T10 Torx screwdriver
• Tweezers or needle-nose pliers
(recommended)
Step 1 : Follow the instructions for removing the enclosure from the rack (see the Chassis Disassembly
section of the OpenFlex Data24 User Guide).
Step 2 : Place the OpenFlex Data24 on an ESD-safe work surface, and ensure ESD safety equipment is
installed and working properly.
Step 3 : Uninstall the Drive Assemblies.
a. At the front of the enclosure, press the release button on the front of a Drive Assembly. The
release handle will rotate outward:
Figure 1: Drive Assembly Release Button and Handle Operation
Note: Crypto Secure Erase may not be available on all drives.
Required Tools
1. EU EcoDesign Disclosures

1.4 Chassis Disassembly

# of People Required
• 2 for removal of the Chassis from the rack
• 1 for the disassembly of the Chassis
3