3. Management
User Guide
3.2 Part Replacement
Figure 103: Enclosure Power Connections
a. Open the cable retention clip on the PSU and connect the power cable into power
receptacle on the PSU.
Figure 104: Cable Retention Clip Operation
b. Slide the retention clip forward on the PSUs until it stops near the cable connectors.
Doing this will ensure that the retention clips function properly in the event the cable is
pulled on.
3.2.3 BMC Module Replacement
Table 32: Replacement Procedure Info
Required Tools
# of People Required
Time Required
None
1
2 minutes
Step 1 : Unpack and inspect the new BMC Module for damage.
88